Buy Kriss Vector SRB
The family of weapons known as the Kriss Vector for sale series is based on the submachine gun. the concept created by Kriss USA, formerly known as Transformational Defense Industries (TDI), an American business. They employ an unusual method of delayed blowback. This works in conjunction with in-line design to lessen muzzle ascent and perceived recoil.
KRISS Vector G2 SDP-E Pistol 45 ACP 6.5″ Black KV45-PBL30
The Vector family has also endured two generations of change. The Vector family’s starting point model is the Gen I variation. Consequently, the upgraded Gen II version later took its place. A new pistol grip and trigger are included with this Kriss Vector Gen II for sale.
The swing angle of the safety lever has also been reduced from 120 to 45 degrees. The Surefire weapon light opening for the original weapon has also been eliminated. They no longer manufacture these. In addition to the standard Flat Black finish, the factory also provides optional Cerakote coatings in Olive Drab (green), Flat Dark Earth (tan), Alpine (white), or Combat Gray.
Buy Kriss Vector SRB
The “Kriss Super V,” an articulated mechanism, is used by the Kriss Vector for sale. This enables the bolt to descend into a groove behind the magazine well together with an inertia block. According to the hypothesis, the energy is sent downward rather than backward at the conclusion of this journey. Thus, the felt recoil is diminished. As with the M16 rifle, when shot, the barrel axis is parallel to the shoulder.
but also parallel to the hand of the shooter. When paired with the off-axis bolt travel, this helps to lessen muzzle climb. Additionally, it significantly increases the sight line relative to the bore axis.
Additionally, the original TDI prototype model was capable of firing 1,500 rounds per minute (RPM). On the production models, however, they reduced this to roughly 1,200 rounds per minute (RPM).
Buy Kriss Vector SRB
Similar to the AR-15 rifle, the for sale Kriss Vector is divided into two main assemblies and held together with four push pins. The lower houses the action, charging handle, magazine well, and barrel due to the weapon’s peculiar layout. The ejection port, rail system, pistol grip, and fire control parts are all located on the upper, together with the stock in stock-equipped variants.
The kriss vector for sale’s modular construction enables toolless caliber modifications. Done by exchanging just the lower. Both the fire mode selector on the auto trigger pack and the safety on the Vector are ambidextrous. However, the magazine releases, charging handle, bolt release catch, and ejection port are not.(Instead, there is just a right-handed version accessible.SRB Kriss Vector
The KRISS Vector CRB is the model that is the most widely accessible and comes with a rifle-length barrel that is legal in 47 states. Both recreational and competitive pistol caliber carbine shooting are great fits for the Vector CRB. The CRB takes full-size Glock® magazines, just like all other KRISS Vector rifles, giving users a selection of high-capacity options.
The core of the Vector CRB is the Super V System, a nonlinear, multilink blowback system designed to direct recoil energy downward. Muzzle ascent and felt recoil are decreased by the Super V System and low bore axis.
Buy Kriss Vector SRB
The CRB takes full-size Glock® magazines, just like all other KRISS Vector rifles, giving users a selection of high-capacity options. The core of the Vector SDP is the Super V System, a nonlinear, multilink blowback system designed to direct recoil energy downward. Muzzle ascent and felt recoil are decreased by the Super V System and low bore axis.
Compatibility of the Recoil Mitigation System Super V with Glock® magazines The low bore axis Flip sights with a full length Stock Kydex grip wrap and a low profile Picatinny top rail have been fixed.
Type of action: Closed Bolt, Delayed Blowback
Stocks that are semi-automated
BLACK is the standard stock color. Weight: 3.6 kg / 8.0 lb
6.5″ BLACK 9MM PISTOL 15RD GLOCK MAGS 811607033663 KV90PBL30 KV90-PBL30 MWS BARREL THREADED WITH SBA3 BRACE (BRACE) SDP-E G2 KRISS VECTOR
10MM KRISS VECTOR SDP ENHANCED KRISS VECTOR SDP ENHANCED KRISS VECTOR SDP-E
Buy Kriss Vector SRB
The KRISS Vector GEN II is the most recent version of the Vector platform, turning it into a multi-caliber weapon system that makes use of the well-liked Glock.magazine from a single-caliber handgun. It takes only a few seconds to switch between calibers without any tools. The KRISS Vector GEN II is more ergonomic thanks to a new trigger, a short throw ambidextrous safety lever, and a more cozy pistol grip.
The KRISS Vector SBR is a short barrel rifle covered by NFA regulations with a 5.5″ barrel for attaching a silencer. Any user can be accommodated by the fixed KRISS M4 type stock’s wide range of adjustment. The KRISS Vector SBR also comes with flip sights and a full-length picatinny top as standard equipment.
Buy Kriss Vector SRB
The most adaptable variation of the Vector SBR is the KRISS Vector SBR Enhanced. With the addition of the MK5 Modular Rail, more space for attachments on the picatinny rail has been added. When folded, the KRISS.Ambidextrous Folding Stock, which is affixed to the back of the receiver, shortens the Vector SBR Enhanced’s overall length by more than nine inches.
The core of the Vector SBR Enhanced is the Super V System, a nonlinear, multilink blowback system designed to channel recoil energy down. Muzzle ascent and felt recoil are decreased by the Super V System and low bore axis. All KRISS Vector rifles, including the SBR Enhanced, are fed by full-size Glock® magazines, enabling interchangeable ammunition.
Although it is a slightly scaled-down version of the Vector, Super V technology still powers it. With just one takedown pin, users can swap between 9x19mm,.40 S&W, and.45 ACP calibers thanks to a newly built lower receiver enabling easy caliber interchangeability.
The charging handle was also changed, and it can now be attached to either side of the weapon. It now travels diagonally, almost vertically.
Additional distinguishing features included a four-sided accessory rail tube around the barrel and a new telescoping stock in place of a folding one.
The “Gen II” versions of the original Vector models were released by Kriss in 2015. These possess this quality.
Kriss Vector SRB
These are compatible with a new 9x19mm lower and have a new pistol grip, trigger, and safety selector. Although none of the K10’s features were carried over, these seem to be the prototypes’ replacements. The Vector makes use of a “Kriss Super V” articulated system, which enables the bolt and an inertia block to descend into a cavity behind the magazine well.
The idea is that at the end of this excursion, the energy is transferred downward rather than backward, reducing the sense of recoil. Similar to the M16 rifle, the barrel axis is aligned with both the shooter’s hand and shoulder when the weapon is fired. This is meant to lessen muzzle climb when combined with the other features.
Buy Kriss Vector SRB
This is meant to reduce muzzle ascent when combined with off-axis bolt travel, however it also raises the sight line much above the bore axis. Although this was decreased to around 1,200 rounds per minute in production units, the early TDI prototype variant shot at a rate of 1,500 rounds per minute. Only semi-automatic variants of civilian models are offered.
The Vector is held together with four push pins in a manner similar to how the AR-15 rifle may be broken down into two main components. The action, charging handle, magazine well, and barrel are situated on the bottom portion of the weapon due to its peculiar layout, while the ejection port, rail system, pistol grip, and fir are situated on the top portion.Buy Kriss Vector SRB
components for the stock in stock variants, the firing control, and the pistol grip. This modular construction allows for tool-free caliber conversions by simply exchanging the bottom. The ejection port, charging handle, bolt release catch, and magazine release are not ambidextrous and are only available in a right-handed configuration, although the safety on the Vector and the fire mode selection on the auto trigger pack are.Buy Kriss Vector SRB
Buy Kriss Vector SRB
Calibers like.22 LR,.40 S&W, and 919mm Parabellum were discussed when the gun was first released. The Gen II variations with many design upgrades, including a new 9mm model, were revealed at SHOT Show 2015, although the.22LR version has not yet appeared.
Vector handguns chambered in.45 ACP are compatible with standard Glock 21 handgun magazines. To convert a factory 13-round.45 ACP Glock magazine to a high-capacity extended version, a special “MagEx 30″[10] kit was offered; however, it was later marketed as a “25+” round kit. [3] 9mm Parabellum-caliber Vectors are utilized with Glock 17 magazines.
The “MagEx2” by KRISS, which expands the capacity of a typical Glock magazine, was released in 2019. The MagEx 2 is available in three different calibers:.45 ACP with 30 rounds, 10mm with 33 rounds, and 9mm with 40 bullets overall.
Kriss Vector SRB
There have been two generations of adjustments to the KRISS Vector. The Gen I version is the baseline model for the Vector family. It was eventually superseded by the improved Gen II model, which has a redesigned pistol grip and trigger and a safety lever with a 45-degree swing angle. Additionally, it eliminates the Surefire weapon light aperture that was located above the barrel of the original weapon but is no longer there.Buy Kriss Vector SRB
Along with the original Flat Black finish, additional factory Cerakote coatings are now offered in the colors Olive Drab (green), Flat Dark Earth (tan), Alpine (white), and Combat Gray.Buy Kriss Vector SRB
The Vector SMG variant is restricted to usage by military and law enforcement personnel. It has a folding stock, back-up iron sights from Midwest Industries (MagPul MBUS on Gen II weapons), a full-length Picatinny rail for mounting different optics/scopes, and either a two-mode (single and full-auto) or a three-mode (single and full-auto) fire selector (single, two-round burst, and full-auto).Buy Kriss Vector SRB
Buy Kriss Vector SRB
Due to the design of the weapon, it is only offered as a whole weapon in.45 ACP and 919mm Parabellum, while the auto trigger pack is compatible with any Vector lower. In the 9mm version, magazines that fit the Glock 17 are typically utilized.Buy Kriss Vector SRB
Semi-automatic variants are produced and available for the US civilian market. The three main configurations are the Vector CRB, Vector SBR, and Vector SDP. In addition to 919mm Parabellum and.45 ACP (with Glock 31 magazines), they can be chambered in.40 S&W (using Glock 22 magazines), 10mm Auto (using Glock 20 magazines), or.357 SIG.
A 921mm IMI variant is available for the Italian civilian market; it uses standard 919mm Glock 17 magazines. Instead of the Super V delayed system, the.22 LR variant operates with a standard straight blowback mechanism and a special 10-round magazine.Buy Kriss Vector SRB
Buy Kriss Vector SRB
Be the first to review “Buy Kriss Vector SRB”